Installation

The R software for running systemPipeR can be downloaded from CRAN. The systemPipeR environment can be installed from the R console using the BiocManager::install command. The associated data package systemPipeRdata can be installed the same way. The latter is a helper package for generating systemPipeR workflow environments with a single command containing all parameter files and sample data required to quickly test and run workflows.

if (!requireNamespace("BiocManager", quietly = TRUE)) install.packages("BiocManager")
BiocManager::install("systemPipeR")
BiocManager::install("systemPipeRdata")

Loading package and documentation

library("systemPipeR")  # Loads the package
library(help = "systemPipeR")  # Lists package info
vignette("systemPipeR")  # Opens vignette

Load sample data and workflow templates

The mini sample FASTQ files used by this overview vignette as well as the associated workflow reporting vignettes can be loaded via the systemPipeRdata package as shown below. The chosen data set SRP010938 obtains 18 paired-end (PE) read sets from Arabidposis thaliana (Howard et al., 2013). To minimize processing time during testing, each FASTQ file has been subsetted to 90,000-100,000 randomly sampled PE reads that map to the first 100,000 nucleotides of each chromosome of the A. thalina genome. The corresponding reference genome sequence (FASTA) and its GFF annotation files (provided in the same download) have been truncated accordingly. This way the entire test sample data set requires less than 200MB disk storage space. A PE read set has been chosen for this test data set for flexibility, because it can be used for testing both types of analysis routines requiring either SE (single-end) reads or PE reads.

The following generates a fully populated systemPipeR workflow environment (here for RNA-Seq) in the current working directory of an R session. At this time the package includes workflow templates for RNA-Seq, ChIP-Seq, VAR-Seq, and Ribo-Seq. Templates for additional NGS applications will be provided in the future.

library(systemPipeRdata)
genWorkenvir(workflow = "rnaseq")
setwd("rnaseq")

Directory Structure

The working environment of the sample data loaded in the previous step contains the following pre-configured directory structure (Figure 4). Directory names are indicated in green. Users can change this structure as needed, but need to adjust the code in their workflows accordingly.

  • workflow/ (e.g. rnaseq/)
    • This is the root directory of the R session running the workflow.
    • Run script ( *.Rmd) and sample annotation (targets.txt) files are located here.
    • Note, this directory can have any name (e.g. rnaseq, varseq). Changing its name does not require any modifications in the run script(s).
    • Important subdirectories:
      • param/
        • Stores non-CWL parameter files such as: *.param, *.tmpl and *.run.sh. These files are only required for backwards compatibility to run old workflows using the previous custom command-line interface.
        • param/cwl/: This subdirectory stores all the CWL parameter files. To organize workflows, each can have its own subdirectory, where all CWL param and input.yml files need to be in the same subdirectory.
      • data/
        • FASTQ files
        • FASTA file of reference (e.g. reference genome)
        • Annotation files
        • etc.
      • results/
        • Analysis results are usually written to this directory, including: alignment, variant and peak files (BAM, VCF, BED); tabular result files; and image/plot files
        • Note, the user has the option to organize results files for a given sample and analysis step in a separate subdirectory.

Figure 4: systemPipeR’s preconfigured directory structure.

The following parameter files are included in each workflow template:

  1. targets.txt: initial one provided by user; downstream targets_*.txt files are generated automatically
  2. *.param/cwl: defines parameter for input/output file operations, e.g.:
    • hisat2-se/hisat2-mapping-se.cwl
    • hisat2-se/hisat2-mapping-se.yml
  3. *_run.sh: optional bash scripts
  4. Configuration files for computer cluster environments (skip on single machines):
    • .batchtools.conf.R: defines the type of scheduler for batchtools pointing to template file of cluster, and located in user’s home directory
    • *.tmpl: specifies parameters of scheduler used by a system, e.g. Torque, SGE, Slurm, etc.

Structure of targets file

The targets file defines all input files (e.g. FASTQ, BAM, BCF) and sample comparisons of an analysis workflow. The following shows the format of a sample targets file included in the package. It also can be viewed and downloaded from systemPipeR’s GitHub repository here. In a target file with a single type of input files, here FASTQ files of single-end (SE) reads, the first three columns are mandatory including their column names, while it is four mandatory columns for FASTQ files of PE reads. All subsequent columns are optional and any number of additional columns can be added as needed.

Users should note here, the usage of targets files is optional when using systemPipeR’s new CWL interface. They can be replaced by a standard YAML input file used by CWL. Since for organizing experimental variables targets files are extremely useful and user-friendly. Thus, we encourage users to keep using them.

Structure of targets file for single-end (SE) samples

library(systemPipeR)
targetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
read.delim(targetspath, comment.char = "#")
##                       FileName SampleName Factor SampleLong Experiment
## 1  ./data/SRR446027_1.fastq.gz        M1A     M1  Mock.1h.A          1
## 2  ./data/SRR446028_1.fastq.gz        M1B     M1  Mock.1h.B          1
## 3  ./data/SRR446029_1.fastq.gz        A1A     A1   Avr.1h.A          1
## 4  ./data/SRR446030_1.fastq.gz        A1B     A1   Avr.1h.B          1
## 5  ./data/SRR446031_1.fastq.gz        V1A     V1   Vir.1h.A          1
## 6  ./data/SRR446032_1.fastq.gz        V1B     V1   Vir.1h.B          1
## 7  ./data/SRR446033_1.fastq.gz        M6A     M6  Mock.6h.A          1
## 8  ./data/SRR446034_1.fastq.gz        M6B     M6  Mock.6h.B          1
## 9  ./data/SRR446035_1.fastq.gz        A6A     A6   Avr.6h.A          1
## 10 ./data/SRR446036_1.fastq.gz        A6B     A6   Avr.6h.B          1
## 11 ./data/SRR446037_1.fastq.gz        V6A     V6   Vir.6h.A          1
## 12 ./data/SRR446038_1.fastq.gz        V6B     V6   Vir.6h.B          1
## 13 ./data/SRR446039_1.fastq.gz       M12A    M12 Mock.12h.A          1
## 14 ./data/SRR446040_1.fastq.gz       M12B    M12 Mock.12h.B          1
## 15 ./data/SRR446041_1.fastq.gz       A12A    A12  Avr.12h.A          1
## 16 ./data/SRR446042_1.fastq.gz       A12B    A12  Avr.12h.B          1
## 17 ./data/SRR446043_1.fastq.gz       V12A    V12  Vir.12h.A          1
## 18 ./data/SRR446044_1.fastq.gz       V12B    V12  Vir.12h.B          1
##           Date
## 1  23-Mar-2012
## 2  23-Mar-2012
## 3  23-Mar-2012
## 4  23-Mar-2012
## 5  23-Mar-2012
## 6  23-Mar-2012
## 7  23-Mar-2012
## 8  23-Mar-2012
## 9  23-Mar-2012
## 10 23-Mar-2012
## 11 23-Mar-2012
## 12 23-Mar-2012
## 13 23-Mar-2012
## 14 23-Mar-2012
## 15 23-Mar-2012
## 16 23-Mar-2012
## 17 23-Mar-2012
## 18 23-Mar-2012

To work with custom data, users need to generate a targets file containing the paths to their own FASTQ files and then provide under targetspath the path to the corresponding targets file.

Structure of targets file for paired-end (PE) samples

For paired-end (PE) samples, the structure of the targets file is similar, where users need to provide two FASTQ path columns: FileName1 and FileName2 with the paths to the PE FASTQ files.

targetspath <- system.file("extdata", "targetsPE.txt", package = "systemPipeR")
read.delim(targetspath, comment.char = "#")[1:2, 1:6]
##                     FileName1                   FileName2 SampleName Factor
## 1 ./data/SRR446027_1.fastq.gz ./data/SRR446027_2.fastq.gz        M1A     M1
## 2 ./data/SRR446028_1.fastq.gz ./data/SRR446028_2.fastq.gz        M1B     M1
##   SampleLong Experiment
## 1  Mock.1h.A          1
## 2  Mock.1h.B          1

Sample comparisons

Sample comparisons are defined in the header lines of the targets file starting with ‘# <CMP>’.

readLines(targetspath)[1:4]
## [1] "# Project ID: Arabidopsis - Pseudomonas alternative splicing study (SRA: SRP010938; PMID: 24098335)"                                                                              
## [2] "# The following line(s) allow to specify the contrasts needed for comparative analyses, such as DEG identification. All possible comparisons can be specified with 'CMPset: ALL'."
## [3] "# <CMP> CMPset1: M1-A1, M1-V1, A1-V1, M6-A6, M6-V6, A6-V6, M12-A12, M12-V12, A12-V12"                                                                                             
## [4] "# <CMP> CMPset2: ALL"

The function readComp imports the comparison information and stores it in a list. Alternatively, readComp can obtain the comparison information from the corresponding SYSargs object (see below). Note, these header lines are optional. They are mainly useful for controlling comparative analyses according to certain biological expectations, such as identifying differentially expressed genes in RNA-Seq experiments based on simple pair-wise comparisons.

readComp(file = targetspath, format = "vector", delim = "-")
## $CMPset1
## [1] "M1-A1"   "M1-V1"   "A1-V1"   "M6-A6"   "M6-V6"   "A6-V6"   "M12-A12"
## [8] "M12-V12" "A12-V12"
## 
## $CMPset2
##  [1] "M1-A1"   "M1-V1"   "M1-M6"   "M1-A6"   "M1-V6"   "M1-M12"  "M1-A12" 
##  [8] "M1-V12"  "A1-V1"   "A1-M6"   "A1-A6"   "A1-V6"   "A1-M12"  "A1-A12" 
## [15] "A1-V12"  "V1-M6"   "V1-A6"   "V1-V6"   "V1-M12"  "V1-A12"  "V1-V12" 
## [22] "M6-A6"   "M6-V6"   "M6-M12"  "M6-A12"  "M6-V12"  "A6-V6"   "A6-M12" 
## [29] "A6-A12"  "A6-V12"  "V6-M12"  "V6-A12"  "V6-V12"  "M12-A12" "M12-V12"
## [36] "A12-V12"

Structure of the new param files and construct SYSargs2 container

SYSargs2 stores all the information and instructions needed for processing a set of input files with a single or many command-line steps within a workflow (i.e. several components of the software or several independent software tools). The SYSargs2 object is created and fully populated with the loadWorkflow and renderWF functions, respectively.

In CWL, files with the extension .cwl define the parameters of a chosen command-line step or workflow, while files with the extension .yml define the input variables of command-line steps. Note, input variables provided by a targets file can be passed on to a SYSargs2 instance via the inputvars argument of the renderWF function.

The following imports a .cwl file (here hisat2-mapping-se.cwl) for running the short read aligner HISAT2 (Kim et al., 2015). The loadWorkflow and renderWF functions render the proper command-line strings for each sample and software tool.

library(systemPipeR)
targets <- system.file("extdata", "targets.txt", package = "systemPipeR")
dir_path <- system.file("extdata/cwl/hisat2/hisat2-se", package = "systemPipeR")
WF <- loadWorkflow(targets = targets, wf_file = "hisat2-mapping-se.cwl", input_file = "hisat2-mapping-se.yml", 
    dir_path = dir_path)

WF <- renderWF(WF, inputvars = c(FileName = "_FASTQ_PATH1_", SampleName = "_SampleName_"))

Several accessor methods are available that are named after the slot names of the SYSargs2 object.

names(WF)
##  [1] "targets"       "targetsheader" "modules"       "wf"           
##  [5] "clt"           "yamlinput"     "cmdlist"       "input"        
##  [9] "output"        "cwlfiles"      "inputvars"

Of particular interest is the cmdlist() method. It constructs the system commands for running command-line software as specified by a given .cwl file combined with the paths to the input samples (e.g. FASTQ files) provided by a targets file. The example below shows the cmdlist() output for running HISAT2 on the first SE read sample. Evaluating the output of cmdlist() can be very helpful for designing and debugging .cwl files of new command-line software or changing the parameter settings of existing ones.

cmdlist(WF)[1]
## $M1A
## $M1A$`hisat2-mapping-se`
## [1] "hisat2 -S ./results/M1A.sam  -x ./data/tair10.fasta  -k 1  --min-intronlen 30  --max-intronlen 3000  -U ./data/SRR446027_1.fastq.gz --threads 4"

The output components of SYSargs2 define the expected output files for each step in the workflow; some of which are the input for the next workflow step, here next SYSargs2 instance (see Figure 2).

output(WF)[1]
## $M1A
## $M1A$`hisat2-mapping-se`
## [1] "./results/M1A.sam"
modules(WF)
##        module1 
## "hisat2/2.1.0"
targets(WF)[1]
## $M1A
## $M1A$FileName
## [1] "./data/SRR446027_1.fastq.gz"
## 
## $M1A$SampleName
## [1] "M1A"
## 
## $M1A$Factor
## [1] "M1"
## 
## $M1A$SampleLong
## [1] "Mock.1h.A"
## 
## $M1A$Experiment
## [1] 1
## 
## $M1A$Date
## [1] "23-Mar-2012"
targets.as.df(targets(WF))[1:4, 1:4]
##                      FileName SampleName Factor SampleLong
## 1 ./data/SRR446027_1.fastq.gz        M1A     M1  Mock.1h.A
## 2 ./data/SRR446028_1.fastq.gz        M1B     M1  Mock.1h.B
## 3 ./data/SRR446029_1.fastq.gz        A1A     A1   Avr.1h.A
## 4 ./data/SRR446030_1.fastq.gz        A1B     A1   Avr.1h.B
output(WF)[1]
## $M1A
## $M1A$`hisat2-mapping-se`
## [1] "./results/M1A.sam"
cwlfiles(WF)
## $cwl
## [1] "/home/dcassol/R/x86_64-pc-linux-gnu-library/3.6/systemPipeR/extdata/cwl/hisat2/hisat2-se/hisat2-mapping-se.cwl"
## 
## $yml
## [1] "/home/dcassol/R/x86_64-pc-linux-gnu-library/3.6/systemPipeR/extdata/cwl/hisat2/hisat2-se/hisat2-mapping-se.yml"
## 
## $steps
## [1] "hisat2-mapping-se"
inputvars(WF)
## $FileName
## [1] "_FASTQ_PATH1_"
## 
## $SampleName
## [1] "_SampleName_"

In an ‘R-centric’ rather than a ‘CWL-centric’ workflow design the connectivity among workflow steps is established by writing all relevant output with the writeTargetsout function to a new targets file that serves as input to the next loadWorkflow and renderWF call. By chaining several SYSargs2 steps together one can construct complex workflows involving many sample-level input/output file operations with any combination of command-line or R-based software. Alternatively, a CWL-centric workflow design can be used that defines all/most workflow steps with CWL workflow and parameter files. Due to time and space restrictions, the CWL-centric approach is not covered by this tutorial.

Structure of param file and SYSargs container (Previous version)

The param file defines the parameters of a chosen command-line software. The following shows the format of a sample param file provided by this package.

parampath <- system.file("extdata", "tophat.param", package = "systemPipeR")
read.delim(parampath, comment.char = "#")
##      PairSet         Name                                  Value
## 1    modules         <NA>                          bowtie2/2.2.5
## 2    modules         <NA>                          tophat/2.0.14
## 3   software         <NA>                                 tophat
## 4      cores           -p                                      4
## 5      other         <NA> -g 1 --segment-length 25 -i 30 -I 3000
## 6   outfile1           -o                            <FileName1>
## 7   outfile1         path                             ./results/
## 8   outfile1       remove                                   <NA>
## 9   outfile1       append                                .tophat
## 10  outfile1 outextension              .tophat/accepted_hits.bam
## 11 reference         <NA>                    ./data/tair10.fasta
## 12   infile1         <NA>                            <FileName1>
## 13   infile1         path                                   <NA>
## 14   infile2         <NA>                            <FileName2>
## 15   infile2         path                                   <NA>

The systemArgs function imports the definitions of both the param file and the targets file, and stores all relevant information in a SYSargs object (S4 class). To run the pipeline without command-line software, one can assign NULL to sysma instead of a param file. In addition, one can start systemPipeR workflows with pre-generated BAM files by providing a targets file where the FileName column provides the paths to the BAM files. Note, in the following example the usage of suppressWarnings() is only relevant for building this vignette. In typical workflows it should be removed.

targetspath <- system.file("extdata", "targets.txt", package = "systemPipeR")
args <- suppressWarnings(systemArgs(sysma = parampath, mytargets = targetspath))
args
## An instance of 'SYSargs' for running 'tophat' on 18 samples

Several accessor methods are available that are named after the slot names of the SYSargs object.

names(args)
##  [1] "targetsin"     "targetsout"    "targetsheader" "modules"      
##  [5] "software"      "cores"         "other"         "reference"    
##  [9] "results"       "infile1"       "infile2"       "outfile1"     
## [13] "sysargs"       "outpaths"

Of particular interest is the sysargs() method. It constructs the system commands for running command-lined software as specified by a given param file combined with the paths to the input samples (e.g. FASTQ files) provided by a targets file. The example below shows the sysargs() output for running TopHat2 on the first PE read sample. Evaluating the output of sysargs() can be very helpful for designing and debugging param files of new command-line software or changing the parameter settings of existing ones.

sysargs(args)[1]
##                                                                                                                                                                                                                                                                                              M1A 
## "tophat -p 4 -g 1 --segment-length 25 -i 30 -I 3000 -o /home/dcassol/danielac@ucr.edu/github/systemPipeR/_vignettes/10_Rworkflows/results/SRR446027_1.fastq.gz.tophat /home/dcassol/danielac@ucr.edu/github/systemPipeR/_vignettes/10_Rworkflows/data/tair10.fasta ./data/SRR446027_1.fastq.gz "
modules(args)
## [1] "bowtie2/2.2.5" "tophat/2.0.14"
cores(args)
## [1] 4
outpaths(args)[1]
##                                                                                                                                M1A 
## "/home/dcassol/danielac@ucr.edu/github/systemPipeR/_vignettes/10_Rworkflows/results/SRR446027_1.fastq.gz.tophat/accepted_hits.bam"

The content of the param file can also be returned as JSON object as follows (requires rjson package).

systemArgs(sysma = parampath, mytargets = targetspath, type = "json")
## [1] "{\"modules\":{\"n1\":\"\",\"v2\":\"bowtie2/2.2.5\",\"n1\":\"\",\"v2\":\"tophat/2.0.14\"},\"software\":{\"n1\":\"\",\"v1\":\"tophat\"},\"cores\":{\"n1\":\"-p\",\"v1\":\"4\"},\"other\":{\"n1\":\"\",\"v1\":\"-g 1 --segment-length 25 -i 30 -I 3000\"},\"outfile1\":{\"n1\":\"-o\",\"v2\":\"<FileName1>\",\"n3\":\"path\",\"v4\":\"./results/\",\"n5\":\"remove\",\"v1\":\"\",\"n2\":\"append\",\"v3\":\".tophat\",\"n4\":\"outextension\",\"v5\":\".tophat/accepted_hits.bam\"},\"reference\":{\"n1\":\"\",\"v1\":\"./data/tair10.fasta\"},\"infile1\":{\"n1\":\"\",\"v2\":\"<FileName1>\",\"n1\":\"path\",\"v2\":\"\"},\"infile2\":{\"n1\":\"\",\"v2\":\"<FileName2>\",\"n1\":\"path\",\"v2\":\"\"}}"



Previous page.Previous Page                     Next Page Next page.